Home | About | Contact 717.478.8519
TSComptuned
 TSCOMPTUNED - Online Store > Evo 8/9 > Parts & Tuning > Engine
  Last Updated: May 31st 2016



Note: If you cannot find what you're looking for below, please contact us directly at sales@tscomptuned.net
and we will help you source the parts you need. We have experience with any kind of engine, and if you're interested
in assembling an engine yourself, but are not sure of what part numbers you need, please contact us and we will help
assist you.
Click here for price matching

 

Wiseco HD 1400 Series Pistons (All Models listed on drop down)


 
Brand: Wiseco
Product Code: N/A
Availability: 2-3 day delivery
Price: $540.00 Shipped
All Available Options STD-.020

Use the following information from this chart to choose the correct piston for your application:

K656M85AP - 1400H.D. • E85 Series • 10.5:1cr • Includes .225” Pins (For Building 2.0L - STD Bore)
K656M855AP - 1400H.D. • E85 Series • 10.5:1cr • Includes .225” Pins (For Building 2.0L - .020 Over)
K656M86AP - 1400H.D. • E85 Series • 10.5:1cr • Includes .225” Pins (For Building 2.0L - .040 Over)
K656M865AP - 1400H.D. • E85 Series • 10.5:1cr • Includes .225” Pins (For Building 2.0L .060 Over or 2.4L STD Bore)
K656M87AP - 1400H.D. • E85 Series • 10.5:1cr • Includes .225” Pins (For Building 2.0L .080 Over or 2.4L .020 Over)
K627M85AP - 1400HD 100mm Stroker • 9:1cr • Includes .225” wall Pins (For Building 2.0LR, 2.1, 2.2, 2.3L, 2.4LR)
K627M855AP - 1400HD 100mm Stroker • 9:1cr • Includes .225” wall Pins (For Building 2.0LR, 2.1, 2.2, 2.3L, 2.4LR)
K627M86AP - 1400HD 100mm Stroker • 9:1cr • Includes .225” wall Pins (For Building 2.0LR, 2.1, 2.2, 2.3L, 2.4LR)
 


 

ACL Mitsubishi 4G63/4G64 7 Bolt 2nd Gen DSM and EVO I-IX High Performance Full Bearing Set /w (Thrust washers included)


 
Brand: ACL
Availability: 2-3 day delivery
Price: $160.00 Shipped
Choose bearing thickness


ACL Mitsubishi 4G63/4G64 7 Bolt EVO V-IX Thrust Washers


 
Brand: ACL
Availability: 2-3 day delivery
Price: $9.00 Shipped
Choose washer thickness


ARP 03-06 Mitsubishi Evo Main Stud Kit


 
Brand: ARP
Availability: 2-3 day delivery
Price: $65.00 Shipped
All Available Part Numbers


Manley Turbo Tuff I-beam rods (Factory or TSComp Spec)


Brand: Manley Performance
Availability: 2-3 day delivery
Starting at: $700.00 Shipped
Options

We take a new set of Manley Turbo Tuff I-Beam rods and precisely with micrometers set proper rod side clearance for both stock and aftermarket crankshafts. Setting proper side clearances on your rods allows your engine to properly move oil and control oil pressure to and from the bearing & the rod caps ultimately controlling heat and pressure throughout the cap and crank radius.

Note: Please choose 625+ rod bolts if you plan on revving past 9500RPM or you risk stretching the standard ARP 2000 rod bolt. If you do not plan on revving your engine past 9500RPM select the regular ARP 2000 rod bolts option (Cheaper in price).
 


 

Manley Turbo Tuff Billet & Forged Crankshafts (All strokes)


Brand: Manley Performance
Availability: 2-3 day delivery
Starting at: $620.00 Shipped
Options

We have Built over 70+ engines to date with Manley components, ranging from Turbo tuff i-beam rods, to Forged to Billet crankshafts. Our oldest engines have over 40,000+ miles on them with 700WHP+ trapping 140mph+ in the 1/4 and used for daily commute. We have had no failures to date on any of our built and assembled engines. Due to our experience with Manley, We are confident in reselling their products.

Our recommendations: If you plan on making more then 750WHP+ Dynojet then we would recommend the Billet crankshaft. From out experience, If you plan on making over 650WTQ Dynojet, do not purchase the "SLW" Super lightweight Billet Crankshaft. This Crankshaft is weakened by Manley cutting out material to remove weight. Please choose the "STD" Standard weight Billet Crankshaft, that we have personally tested to over 750WTQ+ Dynojet with no signs of failure & Trapped 148.14 with just 780WHP in full weight. The SLW Version crankshaft showed signs of flexing and fatigue with just slightly over 650WTQ Dynojet on our personal test evo with just slightly over 750WHP @ 31psi.

For 2.0L Engines we highly recommend the Mitsubishi OEM Crankshaft, Which can be found in the OEM Parts section here for just $800 shipped. The OEM crankshaft is proven, and has been taken 170+ MPH Trap speeds down the 1/4 multiple times.

 

 


Please Note: More products will be constantly added. If you cant find what you're looking for, please email us and ask
for the product here